Product Features
- Engine clean air-intake system: Efficiently prevent the dust enter into the engine. Can be remove easily for cleaning. sticky fuel can clog up the carburetor and cause the chainsaw engine to stall. If the carburetor is clogged, try cleaning it with carburetor cleaner
- Rapid mechanical chain brake handguard. If the spark arrestor is clogged, the chainsaw may run stall or run rough. To unclog the spark arrestor, remove it and clean it with a wire brush
- EcoBoost engine for lower emissions, increased power & reduced fuel consumption
- Anti kick back chain , effective anti-vibration design
- EPA APPROVED
Product Description
• Fuel Tank Capacity: 0.55L
• Oil Tank Capacity: 0.25L
• Engine Displacement: 45cc
• Cutting Length: 22″
• Fuel Mix Ratio: 40(90#gasoline) : 1 (2-cycle oil)
Troubleshooting
Fail to start
Be sure that your saw contains plenty of properly mixed gas
Your two-stroke engine requires a mixture of brand-name gasoline and quality two-stroke engine ooil with the classification FC. Use regular branded unleaded gasoline with a minimum octane number of 90 ROZ. If the octane number of the regular grade gasoline in your area is lower use premium unleaded fuel. Fuel with a lower octane number may result in preignition that is accompanied by an increase in engine temperature, which will increase the risk of the piston seizure and damage to the machine.
If the engine is cold, pull out the choke knob. Then pull the starter rope. This procedure may repeat several times to get started in the first time use.
